IN-SITU
THERMAL CONDUCTIVE HEATING USING GAS THERMAL REMEDIATION
In Situ Thermal Conductive Heating using Gas Thermal Remediation (GTR™) was specifically developed to be the most flexible ISTR platform. Period.
​
GTR Solves These Common In Situ Remediation Challenges:
-
Excavation is difficult - if not impossible - without demolition of buildings.
-
Fast project execution is required for a real estate transaction.
-
Achieving residential or commercial closure goals is mandatory.
-
Low permeability soils such as clays and silts require remediation
-
Limited access to the property.​
-
Groundwater and soil must be treated throughout the site.
-
Performance-based contracting or guarantees of treatment are desired.
After treatment, the heater wells can be reused as geothermal heat storage units; transforming the costs for cleanup into an economical and ecological long term benefit.
BENEFICIAL REUSE!
Our Solution
Thermal remediation using GTR™ technology may be the perfect answer to those particular issues. Each lightweight heater is designed to be operated without a central power distribution system. The flexible installation of heater wells allow GTR™ to be applied in nearly any configuration with vertical, horizontal/directional and slant installation techniques using direct push, auger and/or sonic drilling methods.
IN SITU KEY ADVANTAGES
-
Guarantees available
-
No excavation needed
-
Fast treatment (3 - 6 months)
-
No utility upgrades (small sites)
-
Reliable and repeatable results
-
Permanent contaminant removal